It is currently Sat Sep 23, 2017 12:22 am 






Reply to topic  [ 7 posts ] 

Previous topic | Next topic 

  Print view

Author Message
User avatar  Offline
West Coast Angler Team
West Coast Angler Team
 
Joined: Tue Sep 27, 2005 1:06 pm
Posts: 91
Location: Saratoga, CA
 Post subject: bearing dimensions and abec ratings
PostPosted: Tue Apr 28, 2009 3:13 pm 
here is a list of the bearings that i commonly use. what's listed first are the dimensions, followed by the boca bearings part #, then the abec rating, then the cost rounded up to the nearest dollar. tom hryniuk forwarded some interesting information on abec ratings.....

Quote:

ABEC ratingsThursday, January 8, 2009 6:51 PM
From: "Tom Hryniuk" <tomhryniuk@hotmail.com>

HI Alan, here is a link explaining ABEC tolerance:

http://www.mcmaster.com/library/20070314/60355KAC.pdf

You will notice that on the shaft diameter difference is .0001"(one ten thousandth of an inch). For the O.D. (outside diameter) the difference is .0001" to .0002". So you are looking at a difference of .0003" total deviation. In my world, thats a lot. In a reel that is more than likely plastic molded to a tolerance of +/-.010", at best, or machined to a tolerance of +/-.005", the price difference isn't worth it. More important is the quality of bearings! Just my two cents.....



metric

3 x 8 x 4 SMR693-ZZ #5 $9
3 x 10 x 4 SMR103-ZZ #5 $8
4 x 10 x 4 SMR104-ZZ #5 $8
4 x 11 x 4 SMR694-ZZ #5 $12
5 x 9 x 3 SMR95-ZZ #5 $9
5 x 11 x 3 SMR685 #1 $7 open
5 x 11 x 4 SMR115-ZZ #5 $9
6 x 10 x 3 SMR106-ZZ $7
6 x 12 x 4 SMR126-ZZ #5 $9
6 x 19 x 6 SMR626-ZZ $12 avet
7 x 14 x 3.5 SMR147 #1 $11.45
7 x 14 x 5 SMR697-ZZ #5 $12
7 x 19 x 6 SMR607 #1 $12 or SMR607-ZZ #3 $14 or SMR607-ZZ #5 $18
7 x 22 x 7 SMR627-ZZ #1 $12
8 x 12 x 3.5 SMR128-ZZ #5 $9
8 x 14 x 4 SMR148-ZZ #5 $9
8 x 16 x 5 SMR688-ZZ #5 $9 avet
8 x 19 x 6 SMR698-ZZ #1 $11 or SMR698-ZZ #5 $18
9 x 17 x 5 SMR689-ZZ #5 $12
9 x 20 x 6 SMR699-ZZ #3 $13 or SMR699-ZZ #5 $18
10 x 22 x 6 SMR6900-ZZ #1 $17 or SMR6900-ZZ #5 $28
10 x 26 x 8 SMR6000-ZZ #1 $20
12 x 21 x 5 SMR6801-ZZ #3 $22 avet

inch

0.125 x 0.375 x 0.156 SR2-ZZ #3 $7
0.125 x 0.500 x 0.172 SR2A-ZZ #1 $7
0.1875 x 0.3125 x 0.125 SR156-ZZ #7 $8 avet
0.1875 x 0.375 x 0.125 SR166-ZZ #7 $8
0.1875 x 0.500 x 0.196 SR3-ZZ #1 $6.25 or SR3-ZZ #3 $7.25 or
SR3-ZZ #7 $10
0.1875 x 0.6875 x 0.250 call avet
0.250 x 0.625 x 0.196 SR4-ZZ #3 $8
0.312 x 0.500 x 0.1562 SR1810-ZZ #1 $8 SR1810-ZZ #3 $9 SR1810-ZZ #7 $12.50 avet
0.375 x 0.625 x 0.1562 SR1038-ZZ #3 $11 avet
0.375 x 0.875 x 0.2188 SR6 #1 open $10 SR6-ZZ #3 $12
0.375 x 0.875 x 0.2812 SR6-ZZ #1 open $11 SR6-ZZ #3 $12 SR6-ZZ #7 $16 avet
0.500 x 0.875 x 0.2812 SR6-5ZZ #1 $16 or SR6-5ZZ #3 $17
0.500 x 0.875 x 0.3125
0.500 x 1.125 x 0.3125 SR8-ZZ #1 $20


Top
 Profile  
 
User avatar  Offline
West Coast Angler Team
West Coast Angler Team
 
Joined: Fri Mar 11, 2005 12:43 am
Posts: 1089
Location: sandy eggo
 Post subject:
PostPosted: Fri May 01, 2009 12:41 pm 
Thanks, Alan, for those of us who rebuid out own sometimes this is a great reference.

It would be even better if you could post where you buy these online ..... :P

_________________
Is your [url=http://wepurchaseannuities.com/]Structured Settlement[/url] payment stream now working against your needs ?
-- AL --


Top
 Profile  
 
User avatar  Offline
West Coast Angler Team
West Coast Angler Team
 
Joined: Wed Mar 23, 2005 10:24 pm
Posts: 204
Location: Sturgis, MI
 Post subject:
PostPosted: Sat May 02, 2009 3:14 pm 
hey al, i think boca bearings has all those sizes of bearings.

http://www.bocabearings.com/

cheers
jerry

_________________
Jerry Barkley

"Gilligan...where did you get that stick?"


Top
 Profile  
 
User avatar  Offline
West Coast Angler Team
West Coast Angler Team
 
Joined: Fri Mar 11, 2005 12:43 am
Posts: 1089
Location: sandy eggo
 Post subject:
PostPosted: Sat May 02, 2009 7:49 pm 
Good enough, then .... THANKS Prof! :P

_________________
Is your [url=http://wepurchaseannuities.com/]Structured Settlement[/url] payment stream now working against your needs ?
-- AL --


Top
 Profile  
 
User avatar  Offline
West Coast Angler Team
West Coast Angler Team
 
Joined: Tue Sep 27, 2005 1:06 pm
Posts: 91
Location: Saratoga, CA
 Post subject:
PostPosted: Mon May 04, 2009 1:55 am 
also smoothdrag.com


Top
 Profile  
 
User avatar  Offline
West Coast Angler Team
West Coast Angler Team
 
Joined: Fri Mar 11, 2005 12:43 am
Posts: 1089
Location: sandy eggo
 Post subject:
PostPosted: Mon May 04, 2009 12:31 pm 
alantani wrote:
also smoothdrag.com
Got them both bookmarked now, thanks Amigos!

_________________
Is your [url=http://wepurchaseannuities.com/]Structured Settlement[/url] payment stream now working against your needs ?
-- AL --


Top
 Profile  
 
User avatar  Offline
West Coast Angler Team
West Coast Angler Team
 
Joined: Wed Mar 23, 2005 10:24 pm
Posts: 204
Location: Sturgis, MI
 Post subject:
PostPosted: Mon May 04, 2009 8:04 pm 
one thing at smooth drags they have some nice carbon fiber drag washers in many sizes. I found that there is a certain penn size that fits some of my spinning reels perfectly.

I find that a greased carbon fiber drag kicks tail in those reels.

boy do they have drag now, just ask that 30# dorado i spanked over by cape canaveral last summer!! Oh wait you can't ask it because i ATE it; grilled with lemon pepper and a brewski....

if you need some drags that they don't list give them a call with dimensions

jerry

_________________
Jerry Barkley

"Gilligan...where did you get that stick?"


Top
 Profile  
 
Display posts from previous:  Sort by  
Reply to topic  [ 7 posts ] 

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:

Who is online

In total there is 1 user online :: 0 registered, 0 hidden and 1 guest (based on users active over the past 5 minutes)
Most users ever online was 227 on Tue Nov 20, 2012 10:12 am

Users browsing this forum: No registered users and 1 guest





cron

© 2007, 2008, 2009, 2010 West Coast Angler

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

Style based on Andreas08 by Andreas Viklund

Tweaked by West Coast Angler